H3 Halogen Globes (Pair)


This is one pair of H1 Globes.

Most factory headlights are just 55W Low Beam and 65W High Beam.

12V is typically used in cars, 24V is typically used in trucks.

Have a look at the globes in your lights and see if you need H3 or H1. These are the two most popular globes for single beam lights including High Beam Headlights. In most cases your globes will have H3 or H1 written on them.

These globes suit the ARB IPF 800’s and 900’s. Note the Extreme Sport versions (XS) take H9. I also have these.

SKU: H3 Halogen Globes Categories: ,


There are no tricks here – no blue coating gimmicks or trick wording like HID. These are conventional globes that pass electricity through a thin wire that glows red hot inside a Halogen Gas and so that makes it glow brighter.

They shine a white light. The better your wires are the brighter they will be. If you have low current wires then there will be a hint of yellowing.

We also sell quality relays you can use to run a heavy wire direct from battery to globes to maximise the volts at the globe. The relay turns the power on and off to the globes and receives its signal to do so from your old thin factory wires.

All glass globes require that you don’t touch the glass with your fingers. The reason is that oil from your skin gets super hot on the glass when the lights are on and this can cause the glass to break.

Additional information

Weight 0.2 kg
Dimensions 25 × 17 × 5 cm

12V, 24V


55W, 70W, 100W, 130W