There are no tricks here – no blue coating gimmicks or trick wording like HID or Xenon. These are conventional globes that pass electricity through a thin wire that glows red hot inside a Halogen Gas and so that makes it glow brighter.
In low beam only the top half of the reflector is subjected to light and thus light shines downwards only. This is done by the bottom half of the light’s reflector being shaded from the low beam element by a shield in the globe. The hi beam element in the globe has no shield on that bit and so the entire reflector gets the light.
They shine a white light. The better your wires are the brighter they will be. If you have low current wires then there will be a hint of yellowing.
We also sell quality relays you can use to run a heavy wire direct from battery to globes to maximise the volts at the globe. The relay turns the power on and off to the globes and receives its signal to do so from your old thin factory wires.
Many people ask if they are legal… Anything under 100W is legal so almost all but one option listed are technically legal, but no one has ever had their globe voltage tested when being pulled over.
